Sansui SMX24Z1SMB Manual

Hide thumbs Also See for SMX24Z1SMB:

Installation Step：

❶ Put the TV in a firm place, which must support the weight of the TV. To avoid risks,

please do not expose the TV to hot or humid places (as well as near lights, candles

heaters), and do not block the ventilation on the back of the TV.

❷ Connect the antenna cable to the antenna input terminal of the TV.

❸ Connect the TV power cord

❹ Press the power button of the TV and the indicator light will turn green. If the

indicator light is in standby mode (the light is red), press the power button on the

remote control or TV panel.

(100-240V ~ 50/60Hz)

Table of Contents

Need help?

Do you have a question about the SMX24Z1SMB and is the answer not in the manual?

Page 1 Installation Step： ❶ Put the TV in a firm place, which must support the weight of the TV. To avoid risks, please do not expose the TV to hot or humid places (as well as near lights, candles heaters), and do not block the ventilation on the back of the TV. ❷...
Page 2 Installation of the TV base： ❶ Turn the TV with the LED screen down on a smooth and flat surface. Make sure there is no material strange on the flat surface. ❷ Put the base on the buckle and fix it. Installing the TV on the wall: ❶...
Page 3 Operation of the remote control Installation of the batteries in the remote control: 1. Open the back cover. 2. Use AAA batteries. When inserting the batteries, make sure that the polarity is correct, that is, that the "+" marks are oriented as indicated in the compartment. 3.

Smx32p18smSmx2419dsmrSmx2419dsmw