Advertisement
Quick Links
Advertisement
Summary of Contents for Lock Control DH-66 Series
- Page 1 DH-66/68 Series Electromagnetic Door Holder Installation and Operation manual VER 16.03.22...
- Page 2 Features 1.Both ANSI and BRITISH embedded box installation methods are available for the electromagnetic door holder. User is able to select suitable installation method according to the environment. 2.The armature is able to sway slightly in order to achieve maximum holding force when both armature and electromagnetic door holder are attached firmly in place.
- Page 3 Inspection Before Installation 1.Please make sure there is enough space to mount the electromagnetic door holder when. the door leaf is open wide. 2.Please make sure holding force of door closer is lower than the electromagnetic door holder (an ordinary door closer's holding force is about 20 kg). 65mm DC12V 220mA...
- Page 4 Step2:Voltage adjustment. Please follow P2 to adjust the Voltage (default value as 12V DC) Step3:Mount the electromagnetic door holder. Please refer to the wiring diagram of P2 for wiring. Place the unit in according to the embedded box's position. Tighten the door holder with screws to complete installation. Step4:Mount the armature.