Summary of Contents for Avermedia AVerAI EN713-AAE9-1PC
Page 1
AVerAI for AI at the Edge AVerAI Box PC EN713-AAE9-1PC Designed for NVIDIA ® Jetson Nano Module AVerMedia Technologies, Inc. No. 135, Jian 1st Rd., Zhonghe Dist., New Taipei City 23585, Taiwan Tel: 886-2-2226-3630 Fax: 886-2-3234-4842 Sales and Marketing: Contact...
Disclaimer The information contained in this user manual, including but not limited to any product specification is subject to change without notice. AVerMedia assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user manual.
AVerMedia's opinion, fail to be in the good working order during the warranty period, AVerMedia will, at its option, repair or replace it at no charge, provided that the product has not been subjected to abuse, misuse, accident, disaster, or non-AVerMedia authorized modification or repair.
ESD Warning Electronic components and circuits are sensitive to Electrostatic Discharge (ESD). When handling any circuit board assemblies including AVerMedia AVerAI products, it is highly recommended that ESD safety precautions can be observed. ESD safe best practices can include, but are not limited to the following ones.
And it can operate in the temperature range from 0°C to 45°C. AVerAI EN713-AAE9-1PC provides not only the access to a great list of latest interfaces on Nano module but also 1x RS-485 interface, 1x micro controller unit (MCU), and 1x RTC battery as the function enrichment.
Page 9
SATA Rev. 3.1 Audio 1x Mic-in, 1x Speaker-out CAN Bus RS-485 1x RS-485 Euroblock (3 pins) Expansion Header 40 pins (2x 20 Header) with 1x 3.3V UART2, 2x SPI, 1x I2S, 2x I2C Power Button 1x with a RGB tri-color LED Recovery Button 1x with a RGB tri-color LED IEEE 802.11a/b/g/n/ac dual-band 2x2 MIMO (Optional, by using Wi-Fi...
2.5 Connector Summary Designation Description RJ45 10/100Mb 4-port Ethernet connector with POE support RJ45 10/100Mb 4-port Ethernet connector with POE support RJ45 single-port Ethernet connector 260-pin SODIMM connector for NVIDIA ® Jetson Nano module SATA power wafer Fan wafer Mic and speaker connector USB 3.1 Gen 1 2-port connector with 900mA x2 HDMI video output connector OTG/USB micro-type connector...
10/100Mb 4-Port Ethernet Connectors 10/100Mb 4-port Ethernet connectors, used to connect IP Function cameras and/or the network switches. J1 and J2 Location 4-pin (12-36) RJ45 with integrated Type Description magnetics for PoE application Manufacturer and CHAMPWAY, CWJ46614AENL Part Number Any standard 10/100Mb Ethernet Mating Connector...
3.4 260-Pin SODIMM Connector Used to mount with and connect to Function NVIDIA ® Jetson Nano module. Location 260-pin SODIMM connector Type Description Manufacturer and FOXCONN, ASAA826-EASB0-7H Part Number Mating Connector SODDR4 9.2 standard Please refer to NVIDIA Jetson Pinout Nano System-on-Module datasheet for the pinout details.
3.6 Fan Wafer Function Fan power and control wafer Location 1*4 pin wafer with 1.25 mm pitch Type Description Manufacturer and Joint Tech, Part Number A1250WV-04PNLNT1N00B Joint Tech, Mating Connector A1250 series housing Pin Number Description 5V Power Pinout TACH from fan to module PWM from module to fan...
3.9 HDMI Video Output Connector Function HDMI Type-A TX connector Location HDMI Type-A female connector Type Description Manufacturer and Compupack, ACNHM220028-001 Part Number Any HDMI standard Type-A Mating Connector interface cable or device. Pinout Please refer to HDMI standard. Remarks None 3.10 OTG/USB Micro-Type Connector Function...
3.12 54VDC Power Jack Function 54V DC power input Location 2.5 mm power jack Type Description Manufacturer and JKCR, DCD-020-105B Part Number Mating Connector Any 2.5mm power plug cable Pin Number Description Pinout 54V Power None Remarks 3.13 20-Pin Header UART console for debug, I2C, Function GPIO...
3.14 Mini Card Connector Function LTE or Wi-Fi Module Location Mini-Card for USB Type Description Manufacturer and FOXCONN, AS0B221-S68Q-7H Part Number Any Mini-Card standard interface Mating Connector device. Please refer to Mini-Card standard Pinout for the pinout details. Support USB 2.0 only, not PCIe Remarks 3.15 RTC Battery Connector Function...
3.19 Other Switches and Jumpers Other switches and jumpers, such as SW1, JP3, JP4, and JP5, etc. marked on the printed circuit board of EN713-AAE9-000 carrier board, are reserved for the internal use by AVerMedia. They are not open to the client application.
4.0 Installation Check and ensure all the external system power supplies are turned off. 2. Install the necessary cables for the application. The cables can include the following ones. For the additional information of these mentioned cables, please refer to 8.0 Accessory Drawings in this manual.
After the system software is updated successfully, please ensure to power off the system. A clean power-on will then revert OTG port back to the host mode. 7.0 Power Consumption Item Description Power Consumption Theoretical Maximum System Power Consumption 54V, 150.0W Idle mode: Nano module ON.
® 9.3 Assembly Drawing of Carrier Board and NVIDIA Jetson Nano Module 9.4 Assembly Drawing of Box PC, HDD, and HDD Cable (Remove the mounting screws of the bottom plate from the chassis)
Page 33
(Mount the bottom plate with HDD) (The arrow is used to show the direction to plug HDD cable to HDD.)
Page 34
(The assembly of the bottom plate with HDD, HDD cable, and Box PC) (Mount the assembly of the bottom plate with HDD into Box PC) Russia: IDSolution LLC, +74955453283, www.idsolution.ru...
Need help?
Do you have a question about the AVerAI EN713-AAE9-1PC and is the answer not in the manual?
Questions and answers