Stand Removal; Rear Cover - Philips 43PUS6162/12 Service Manual

3.2.2

Stand removal

1. For 6262 Serial, remove the fixation screws [2] that secure the stand for 6262 Serial
For 6162 Serial, remove the fixation screws [1] that secure the stand
2. Take the stand bracket out from the set.

3.2.3 Rear Cover

Warning: Disconnect the mains power cord before removing the rear cover.
Remove fixation screws [3] and [4] gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear
cover from the set.
( 6162 series)
(6262 series)