Usb Communication - UNI-T 165H User Manual

6.5.9 Factory Reset
To restore settings:
1. Press the up/down button to select the Factory Reset option in the settings
menu.
2. Press the SET button to enter the Factory Reset submenu.
3. Press the up/down button to select Yes.
4. Press the SET button to confirm.
5. Press the back button to exit the current menu.
6.5.10 Format SD Card
To format SD card:
1. Press the up/down button to select the Format SD option in the settings menu.
2. Press the SET button to enter the Format SD submenu.
3. Press the up/down button to select Yes.
4. Press the SET button to confirm.
5. Press the back button to exit the current menu.
165H User Manual 165H User Manual
6.5.11 Auto Save
To turn on/off auto save:
1. Press the up/down button to select the Auto Save option in the settings menu.
2. Press the SET button to enter the Auto Save submenu.
3. Press the up/down button to select On or Off.
4. Press the SET button to confirm.
5. Press the back button to exit the current menu.
Note: Do not remove or insert the SD card in saving or viewing pictures. If the
SD card is replaced during use, restart the device after the replacement to take
and save pictures.

7.USB Communication

1. Download and install the PC software (refer to UNI-T Documents Download
Operation Guide).
2. Connect the USB cable to the PC.
3. Users can browse pictures and analyze data through the PC software.
Regarding its usage, retrieve the Software User Manual from the Help
option of the operation interface.
Note: Do not unplug the USB cable while the software is loading pictures.