Page 1
Blackpete-NUC Assembling First you need to remove the active fan from the NUC mainboard.
Page 2
Now you need to install the passive heatsink. Please place the 3 thermal pads on the positions listed below : 1x pad between heatsink and CPU (1) 1x pad between heatsink and GPU (2) 1x pad between heatsink and enclosure (3)
Page 3
Now open the enclosure and remove the adapter plate. Insert the mainboard.
Page 4
To install the mainboard: Fix mainboard Insert RAM module (eg. http://www.cartft.com/catalog/gl/151 Insert mSATA SSD (eg. http://www.cartft.com/catalog/gl/156 Alternatively you can install 2.5“ HDD/SSD (instructions are in this document) Connect Power LED, HDD LED, Power-Switch and USB cable Please note that green and red cable are plus (+) .
Page 6
Power button at front Green LED= Power ON / Red LED= SSD Activity...
Page 7
Instructions for installing DCDC-USB converter (100Watt) You can find the optional DCDC-converter available here : http://www.cartft.com/catalog/il/1114 Install the DCDC-converter in the enclosure. Connect DCDC-converter with the mainboard (4pol-connector) Connect PSW (power switch) with the mainboard (instead of blue Power-Button of the enclosure) ...
Page 9
Now the system can be powered through the green power connector. Note : Power button is now without function!
Page 10
Installation of 2.5“ HDD / SSD drive Connect SATA-power cable with the mainboard (fan connector)
Page 11
Mount the mSATA-to-SATA adapter in MiniPCIe slot Connect SATA-data cable.
Page 12
Mount the 2.5“ HDD/SSD drive. Mount the adapter plate in the enclosure. Now close the enclosure and installation of 2.5“ HDD/SSD ist finished. http://www.CarTFT.com / Alex Wickberg / 21.05.2013...