Advertisement
Chapter3
Assembling guidelines
FRAME COMPLETION
Assemble the angle brackets and the 2 panels (top
and bottom) and insert the side panel. Fix it by means
of qty. 8 screws (flat head - 6.3x16) to the angle
brackets plus 4 screws (round head - 6.3x13), 2
for each panel. It is recommended using a pneumatic
screwdriver applying a torque of 16 Nm.
Remove the protection mesh from the back side of the
fan and place the hooks on the fan by means of qty. 2
self tapping screws (round head - 6.3x19).
© Munters AB, 2019
17
Advertisement
