Audible Signal (Beeper) - Allen-Bradley MediaChecker 1788-MCHKR Manual

6
Getting Acquainted
1
STP
Figure 3. Connections
1788-UM002A-US-P – April 2000
2
3
UTP/FTP COAX
aan03f.eps
Table 4. Connections
Item
A
Standard 9-pin (DB9) connector for connecting
DeviceNet and DH+/RIO cables (using the
adapter provided).
B
Standard 8-pin modular jack for connecting
unshielded (UTP) and foil-screened (FTP)
unshielded twisted pair cable for Ethernet IEEE
802.3 networks.
C
BNC connector for connecting ControlNet
cables.

Audible Signal (Beeper)

The MediaChecker's beeper indicates various conditions:
•
A single, short tone indicates a pass condition
without the Cable ID detected.
•
A two-frequency tone indicates a pass condition with
the Cable ID detected.
•
Three short tones indicate a test failure.
•
A long tone sounds whenever an invalid key is
pressed.
Description