Indications Of Improper Use; Supplies; Spare Parts Ordering - Tajfun Planina RCA 380 Operating Instructions Manual

5.11. INDICATIONS OF IMPROPER USE

Certain damages which occur before the end of the lifespan of exposed machine components may indicate
overloading or inappropriate handling of the machine. Manufacturer's warranty does not cover damages of
this kind.
 Torn or damaged in-feed or discharge conveyor belts

Torn cutting chain
 Damaged chain guide (sawbar)

Damaged or bent framework, wedge or cylinder protection
 Damaged or bent length limiter or trapdoor

Torn cutting chain drive belt
 Damages to the operating handles

Damages to the framework due to unsuitable transport
 Damaged hand winch on the conveyor

Damaged carrying chain carabiner
 Damaged wedge holder
 Damaged or broken splitting wedge

Clogged or damaged air filter
Important:
The machine is functionally and safety tested. To ensure flawless and safe operation it is necessary to use only
original spare parts in case of breakdown. The customer looses all claims of warranty if non-original spare
parts are used, if repairs are performed unprofessionally or by unqualified person or in case of any
modifications to the machine.

5.12. SUPPLIES

The machine incorporates following parts, which have to be replaced by the customer as necessary. These
parts are not covered by the warranty period, which is defined in the warranty statement.
 Cutting chain

Drive chainwheel
 Cutting chain guide (sawbar)

Cutting chain drive belt
 Electric motor driven belt

Conveyor wire rope
 In-feed conveyor belt

Discharge conveyor belt
 Splitting wedge

Oil
 Air filter

5.13. SPARE PARTS ORDERING

When ordering spare parts it is necessary to provide the following information:
Model and serial number of the machine; catalogue number, name and quantity of the spare part;
Exact address of the customer
The manufacturer warrants spare parts availability and service 10 years after the purchase of the machine.
27