NEC M120 Setup Manual page 14

８
Initializing the Disk Array Unit
Initialize the disk array. The initialization method differs depending on the model.
8-1
Collecting host information for FC connection or SAS connection
・ To automatically collect host information, go to 8-2.
Collect host information from the application server. See the following section:
FC connection
SAS connection
8-2
Initializing and configuring the disk array
FC connection
Initialize and configure the disk array from the iSM client. See the following section:
5-3 Initializing the FC connection
SAS model
Initialize and configure the disk array from the iSM client. See the following section:
5-2 Retrieving Host Information - Overview
6-2 Retrieving Host Information - Overview
6-3 Initialization the SAS Connection