E-mail: info@lkm-security.com Web: www.lkm-security.com WIFI+GSM+PSTN Home Alarm System Contents 1. Preface 2. Main Features and Technical Information 3. Top View 4. Back Panel Cable Connection View 5. Initialization 6. Daily Operation 6.1 System Arm 6.2 System Disarm 6.3 System Stay Arm 6.4 SOS...
E-mail: info@lkm-security.com Web: www.lkm-security.com 1. Preface Thanks for choosing our WiFi + GSM + PSTN home alarm system. This system has implanted the most advanced and popular WiFi technology into traditional GSM +PSTN alarm system technology, which with simple wireless set up and easy -read LED display.
Page 4
E-mail: info@lkm-security.com Web: www.lkm-security.com 3. Front Panel View ► Power: Power light is on and screen show AC adaptor → alarm panel is turned on and power supply powered. Power light is on and screen show battery → alarm panel is turned on and battery powered.
Page 5
E-mail: info@lkm-security.com Web: www.lkm-security.com ► Alarming: Alarm light is on and screen shows “Zone Number + Alarm”, for example 88 Alarm → 88 Zone is alarming. Alarm light is off → No alarm occurs ► WIFI Signal: WIFI light flash → alarm panel WIFI has not initiated yet;...
E-mail: info@lkm-security.com Web: www.lkm-security.com 4. Back Panel Cable Connection Diagram 5. Initialization Insert SIM Card, connect power supply, and then switch on the alarm panel, the panel will voice prompt "Welcome to use alarm system", and start searching GSM network.
E-mail: info@lkm-security.com Web: www.lkm-security.com 6.2 System Disarm It means to stop the alarm when the panel sounds or make the alarm system in the status of non-warning. After disarming, the panel would not sound alarm even if you trigger the detectors.
E-mail: info@lkm-security.com Web: www.lkm-security.com 6.4 SOS In emergency, press the SOS button on the remote controller, the system panel will start alarm and call the preset phone numbers automatically for help. There are two methods to start SOS emergency. Notes: If alarm panel keypad lock enabled, user need enter password before any other operations.
E-mail: info@lkm-security.com Web: www.lkm-security.com 9.3 Bind Device: 1. After the alarm host connected to WiFi, then it will automatic search device; 2. Click the device which user wants to Bind; Click “Confirm” to bind. 9.4 Remark Device Name/Unbind Device: 2. Click the device which user wants to remark or unbind;...
E-mail: info@lkm-security.com Web: www.lkm-security.com 9.5 System Status Setting: 1. Click the device to enter main interface to set Arm, Disarm and Stay Arm. Sede Legale: Sede Operativa: Lookathome s.r.l Lookathome s.r.l Via dei campi, 127 - 22070 Binago (CO) Viale Corbusier, 327- 04100 Latina (LT) Tel.
E-mail: info@lkm-security.com Web: www.lkm-security.com 9.6 Zone Setting: 1. Modify Zone Name: Steps: Click “Device Setting” → Click “Zone Setting” → Choose the zone which user wants to Modify → Click “Modify Name”→ Enter name → Click “Save” 2. Setting Zone Type: Step: Click “Zone Type”...
E-mail: info@lkm-security.com Web: www.lkm-security.com 3. Add/Delete Accessories: Steps: Click “Accessories”, each zone can add 4 detectors → Press one of the button between 1-4, → alarm host will make “Beep” “Beep” voice, it means the alarm host is under setting status → Trigger the accessories to send signal out.
E-mail: info@lkm-security.com Web: www.lkm-security.com 9.7 Add/Delete Alarm Phone No. and SMS Phone No 1. Add/Delete Alarm Phone No. Steps: Click “Alarm Phone No.” and then input Phone No. click “Apply” Button to Save the setting. Delete phone No. and then click “Apply” to save the setting.
E-mail: info@lkm-security.com Web: www.lkm-security.com 9.9 System Time Setting: Click “Time Setting”, then user can set system time there. 9.10 Timing Setting: Click “Timing Setting”, then user can set Alarm Delay Setting, Arm Delay Setting etc. There also have two groups Timing Arm and Disarm by week.
E-mail: info@lkm-security.com Web: www.lkm-security.com 9.11 Other Operations: 1. Switch Settings: User can turn ON/OFF all the switches in via this function. 2. Siren Setting : User can set Siren ON/OFF and Alarm Time. 3. Modify Device Password: User can reset passed of the device.
E-mail: info@lkm-security.com Web: www.lkm-security.com 10 GSM Operation: 10.1 Answer Alarm Call When alarm occurs, alarm panel will dial the pre-set number, If telephone-line and GSM network both normal, alarm panel will prior to choose telephone network to dial preset phone number from Group 1-9 meanwhile sent SMS to preset SMS phone number.
Page 18
E-mail: info@lkm-security.com Web: www.lkm-security.com 【1-4】Means 4 groups alarm phone number Alarm Phone Number Setting E.g. Set 13868686868 as the 3 group alarm phone number. 1. Press [#] on the panel and then press [3113868686868#] Command: 2. Remote calling the alarm panel, input [password]+[#] to enter [3] +[1-4]+ [Phone No.]+[#]...
Page 19
E-mail: info@lkm-security.com Web: www.lkm-security.com E.g.: User need to adjust the volume into 50 1. Press [#] on the keypad and then press [1450#] 2. Remote calling the SIM card number, input [password]+[#] to enter setting status, then press [1450#] 3. Send SMS message [12341450#] [0/1]: 0 means OFF, 1 means ON.
Page 20
E-mail: info@lkm-security.com Web: www.lkm-security.com arming by remote or panel. Delay arm time can be set 0-99s, default is: 00s. Command: E.g. : User wants to set the delay arming time as 60s. [51] +[00-99 1. Press [#] on the keypad and the press [5160#] seconds]+[#] 2.
Page 21
E-mail: info@lkm-security.com Web: www.lkm-security.com E.g.: Set the first group timing arm at 22:00, timing disarm at 07:00, Command: [57]+ [01~04 group from Monday to Friday are effectively. number]+[AAAA Arm 1. Press [#] on the keypad and then press [57012200070012345#] Time]+[BBBB Disarm 2.
Page 22
E-mail: info@lkm-security.com Web: www.lkm-security.com [0/1]: 0 means OFF,1 means ON. Default is OFF. Door Sensor Two-way ON/OFF E.g. : Set door sensor two-way Alarm function ON 1. Press [#] on the keypad and then press [631#] 2. Remote calling the alarm panel, input [password]+[#] to enter Command:...
E-mail: info@lkm-security.com Web: www.lkm-security.com controls and detectors are deleted. Password turns to default 1234. 10.4 SMS Query Command and Setting The following instructions are only for SMS command to control panel remotely: Send SMS 12340# into alarm panel Disarm Note: 1234 is the password, If client changed password, then need...
E-mail: info@lkm-security.com Web: www.lkm-security.com Disarm: 13:00 Week:1234567 Second Group Arm: 12:00 Disarm: 13:00 Week:1234 Third Group [57]+[#] Arm: 12:00 Disarm: 13:00 Week: 234 Fourth Group Arm: 12:00 Disarm: 13:00 Week:567 Customize Zone SMS [00-99] Means 99 wireless zones Example: Send SMS “12348001 Front Door Alarm#” to the alarm Content panel, then replies “Zone 01 Front Door Alarm”...
E-mail: info@lkm-security.com Web: www.lkm-security.com 12. Installation of the Detectors: The Installation Diagram of Magnetic Door Detector: Caution: A:The gap between the magnet and the sensor should be less than 10mm. B:After the installation, if the indicate light of the detector is on when the door is open. It proves it is installed successfully.
E-mail: info@lkm-security.com Web: www.lkm-security.com D: The furniture, mini escape or any other isolation should be away from the detecting scope. E:Do not install two or more detectors in the same area or it will cause the interference when alarm. F:When the detector is triggered and the LED indicator flashes, it means the battery is in low voltage, please change it as soon as possible.