ENGLISH SHC 4357 RECHARGEABLE HAIR CLIPPER INSTRUCTION MANUAL The hair clipper is a part of the hair clipper set and is intended for hair cutting and thinning. DESCRIPTION 1. Housing, 2. On / Off switch, 3. Indicator light, 4. Charge socket, 5. Adapter, 6. Socket inlet, 7.
Page 4
• Always keep the blades clean and lubricated. • After each use of the hair clipper clean the attachments and the blade block with the brush supplied to remove the cut-off hair. • Never leave the operating unit unattended. • Switch the hair clipper off during breaks between operation cycles or when you are not using it.
Page 5
– Switch the hair clipper off, setting the power switch to the “O” position. – Insert the power adapter cord plug into the connection socket on the lower side of the unit body. – Place the hair clipper on a flat stable surface. –...
Blade height switch 0.8 mm/1.8 mm When the switch is in the lower (usual) position, the cutting length is 1.8 mm. To reduce the cutting length to 0.8 mm set the switch to the upper position. Universal attachment The universal attachment has 6 positions for different hair cutting length. It is indicated on the scale situated on the left side of the hair clipper body: –...
Page 7
shoulders with a towel and set hair with the comb. – Switch the unit on by setting the power switch to the position «I». – After you finish using the unit, set the power switch to the position «O». Notes: –...
clipper. • You may use a comb: lift the hair locks and cut them with the hair clipper over the comb. • Always start cutting from the head back. • Comb the hair to reveal uneven locks. • Use scissors to trim hair. Step 5 –...
Need help?
Do you have a question about the SHC 4357 and is the answer not in the manual?
Questions and answers