Connecting Your Tv; Connecting A Vcr - Toshiba 46H83 Owner's Manual

Projection television
Hide thumbs Also See for 46H83:
Table of Contents

Advertisement

Connecting your TV

Note: Cables are not supplied with your TV.
Coaxial cable is the cable that comes in from your antenna, cable TV
service, or cable converter box. Coaxial cable uses "F" connectors.
Standard A/V (audio/video) cables usually come in sets of three, and
are typically color-coded according to use: yellow for video, red for
stereo right audio, and white for stereo left (or mono) audio.
On your TV's back panel, the standard A/V inputs are color-coded in
the same manner as the cables.
S-Video cable is for use with video equipment that has an S-Video input.
Component video cables come in sets of three, and are for use with
video equipment that has component video inputs. (ColorStream
Toshiba's brand of component video.)
DVI-D digital single-link cable is for use with video equipment that
has a DVI-D digital single-link connector (see page 14).
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
For GOOD picture quality: Use a standard yellow video cable.
For BETTER picture quality: If your equipment has an S-video
input, use an S-video cable instead of a standard yellow video cable.
(You still must connect the standard red and white audio cables for full
system connection, but do not connect the standard yellow video cable at
the same time, or the picture performance will be unacceptable.)
For BEST picture quality: If your equipment has component video (or
DVI) inputs, use either component video cables (or a DVI cable) instead
of a standard video or S-video cable. (You still must connect the standard
red and white audio cables for full system connection, but do not connect
the standard yellow video cable or an S-Video cable at the same time.)

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
From Cable Box or Antenna
Stereo VCR
OUT to TV
IN from ANT
CH 3
CH 4
ANT( 75
ANT-1
OUT
S-VIDEO
VIDEO
L/
MONO
AUDIO
TV
8
VIDEO
AUDIO
L
)
DVI/HDCP IN
ANT-2
IN
COLOR
COLOR
VIDEO 1 VIDEO 2
STREAM
STREAM
HD-1
HD-2
Y
Y
AUDIO
R
L
P
P
B
B
OUT
AUDIO CENTER
P
P
CHANNEL IN
R
R
VIDEO
L/
MONO
L
L
L
VAR
AUDIO
AUDIO
AUDIO
AUDIO
ON OFF
R
R
R
R
R
Coaxial (antenna) cable
Standard A/V cables (red/white/yellow)
S-video cable
®
is
Component video cables
DVI-D digital single-link cable
CAUTION:
Do not plug in any power cords until you have
finished connecting all equipment.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
R
If you have a VCR with S-video, use an
IN
S-video cable (in the S-video jacks) instead of
OUT
the standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time, or the picture performance
will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

51h8357h8365h83

Table of Contents