Using The Locks Menu; Entering The Pin Code - Toshiba 43HX71 Owner's Manual

Using the LOCKS menu

The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.

Entering the PIN code

1. Press MENU, and then press x or • until the LOCKS menu
appears.
LOCKS
V CH I P –
ENABLE BLOCK I NG OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK OFF
FRONT PANEL LOCK OFF
NEW P I N CODE
2. Press y or z to display the PIN code entering mode.
• Factory Reset status:
Set your 4-digit code by pressing
the Number buttons (0-9), and
then press ENTER.
LOCKS
BLOCK NG RESET I
P I N CODE 1 1 1 0
If a wrong PIN code is entered, the message "Incorrect" appears.
Enter the code again, and then press ENTER.
If you cannot remember the PIN code, while in the PIN code
entering mode, press the RECALL button four times within five
seconds. The PIN code will be released (Blocking Reset status
restored).
LOCKS
V CH I P -
ENABLE BLOCK I NG ON / OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK OFF
FRONT PANEL LOCK OFF
NEW P I N CODE
Continue to set each item following the steps on the next page.
• When the PIN code is already stored:
Press the Number buttons (0-9) to enter
the 4-digit PIN code used for blocking
channels, and then press ENTER.
LOCKS
BLOCK NG ACTIVE I
P I N CODE 1 2 3 4
Number
MENU/ENTER
yzx •
RECALL
35