Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba 43H71 Owner's Manual

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display "1/2 MUTE" or "MUTE" in the lower
right corner. Every time MUTE is pressed, the mute mode will
change in the following order.
→ Normal → 1/2 MUTE → MUTE
When you select "MUTE" mode, the closed caption feature is
automatically activated. To deactivate this feature, press MUTE again.
This feature works only when the closed caption mode is set to OFF.
See "Using the closed caption feature" on page 40 for more
information.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight STEREO.
AUD O I
MTS
STEREO / SAP MONO
BASS 5 0
TREBLE 5 0
BALANCE 0
RESET
You can leave the TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural). The word "STEREO" or "SAP" displays in yellow in
the menu when the TV receives the signal.
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight SAP. You will hear the station's second
audio program (if available) from the speakers, while viewing the
original program's picture (see note at right).
42
/
RECALL
LIGHT RECALL POWER
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
MUTE
1 2 3
CH
4 5 6
7 8 9
VOL
CH RTN
100 0
ENT
ADV/
PIP CH
MENU
MENU/
FAV FAV
ENTER
yzx •
ADV/
PIP CH
STOP SOURCE PLAY PIP
REC TV/VCR REW FF
43H71
STILL LOCATE SWAP
CH
MENU VOL VOL EXIT TV/VIDEO TOUCH FOCUS
CH
MENU yzx •
53H71/61H71
CH
MENU EXIT TV/VIDEO TOUCH FOCUS
VOL VOL
CH
MENU yzx •
Note :
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program's normal audio.
However, if you have SAP on, and the station
you are watching is not currently
broadcasting a second audio program, you
will see the picture but not hear any sound. If
this happens, put the TV in STEREO mode so
you can hear the station's normal audio.
PO
POWER