easyteck T120 User Manual page 10

Boost
1.Press Menu and go to Settings.
2.Select Boost and press OK.
3.Activate or delete the extra volume (higher volume) during phone calls.
Family numbers
M1 and M2 buttons can be used to make quick phone call sto predefined numbers.
To add numbers to be called pressing M1 or M2 buttons:
1.Press Menu and go to Settings.
2.Select Family numbers and press OK.
3.Activate the function (Status ON) and select Number setting.
4.Select 1 (corresponding to M1 button) and press Option, after that you can choose the
telephone number from the Phonebook or insert it manually.
5.At this point, pressing the M1 key, a phone call will be made to the phone number here
specified.
Select 2 to to modify the number associated to the button M2.
18
User Profiles
1.Press Menu and go to Settings.
2.Select User Profiles and press OK. The basic profiles are the following:
General
Silent
Meeting
Outdoor
For every profile, you can set up the ringtones for power on/off, call ringtone, etc.
2.Select General and press Options.
3.Select Customize and press Select.
4.Select Alert type and press Options in order to Select
and Ring or Vibration and then ring. Press OK to save.
5.Go to Ring type and press Options to decide if the ringtone must be repeated until the
answer, or only once.
6.Go to Ringtone and press Options to select the desired ringtone.
7.Go to Ringtone Volume and press Options; use the arrows to increase or decrease the
ringtone volume, and press OK to save.
Ring Only, Vibration only, Vibration
19