Free; Motor Pulley (254040) For Series; Motor Pulley (243940) For Series - TANDBERG 15 Series General And Technical Information

218415
207625
203638 M313
207625 218415
210987
Fig. 4.23.
Fig. 4.24.
209658
990226
990227
209658
213997
213997
202230
990228
M313 248186
248186
203638
990229
202740
M313
254040
E
E
N
0
_"
33/4 pr. s.
II
17/8" pr. s.
0,5 mm
(0.02")
Motor
4.3.5 Free
The motor is switched off by the switch 202151 and
both friction discs are stationary.
Supply turntable. Fig. 4.23.
The supply turntable is free. For adjustment, see
chapter 4.3.3.
Take-up turntable. Fig. 4.24.
The take-up turntable is free. For adjustment see
chapter 4.3.4.
4.4 MOTOR PULLEY (254040) SERIES 14
Fig. 4.25 Rear view of drive mechanism.
The models 14-4 and 14-2 have two speeds: 17/8 ips
and 33/4 ips as determined by the diameter of the
selected motor pulley track. Fig. 4.25 is a rear view of
the drive mechanism with the transfer wheel 990233
engaged with the motor pulley track for 17/8 ips.
16
4.5 MOTOR PULLEY (243940C) Series 15
The models 15-4 and 15-2 have three tape speeds:
17/8 ips, 33/4 ips and 71/2 ips, as determined by the
diameter of the selected motor pulley track.