Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AUDAC CELO8S
Summary of Contents for AUDAC CELO8S
- Page 1 CELO8S User & Installation Manual www.audac.eu...
- Page 3 When the grill is removed, it’s clear for anyone to see that the CELO8S is made by using only the highest quality materials, guaranteeing an unsurpassed sound experience. This results in true to nature sound reproduction for a warm and detailed sound with an RMS power of 50 Watt per channel.
- Page 4 Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY • ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM AWAY • ALWAYS HANDLE THIS UNIT WITH CARE • CLEAN ONLY WITH DRY CLOTH • HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS •...
-
Page 5: Caution - Servicing
CAUTION • USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER • USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM. • ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE. EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES. -
Page 6: Installation Procedure
The CELO8S features a quick-fixing mechanism, which allows quick and easy installation of the subwoofer in only a few minutes. The installation of the CELO8S requires a minimum amount of installation skills. Before the loudspeaker is installed, the location whereto it will be mounted should be carefully checked to make sure the surface can support the weight of the speaker and no lines for water, gas, electricity or other supplies are crossing this point. - Page 7 Two or four 8 ohm satellites can be used as well as eight 16 Ohm satellites. STEP 3 Connect the wiring by attaching the cables to the terminal block connectors and plugging them in to the CELO8S. Make sure the connectors are secured by tightening the set screws. HFR: Connect your right channel satellites...
- Page 8 STEP 4 Make sure the mounting clamps are fully bended inwards, allowing the speaker to fit through the cut out. Insert the speaker into the cut out and tighten the mounting screws. A quarter turn is enough to flip out the mounting clamps, locking the speaker in place. STEP 5 Tighten the screws for proper fixation of the speaker.
- Page 9 STEP 7 Depending on the acoustical properties of your room and placement of the subwoofer, the sub can be better integrated in your room when switched to either 0° or 180°. We recommend 0° when all speakers are mounted in a flat wall or ceiling. STEP 8 Attach the grill.
-
Page 10: Additional Information
Additional Information Technical specifications RMS Power 50 Watt / Channel Max. Power 100 Watt / Channel Nominal impedance 8 Ohm / Channel Sensitivity 1W / 1m 83 dB / Channel Sound pressure Max W / 1m 103 dB / Channel Frequency response -3 dB 45 Hz - 200 Hz Cross-over frequency... - Page 11 Notes...
- Page 12 Notes...
Need help?
Do you have a question about the CELO8S and is the answer not in the manual?
Questions and answers