Related Manuals for PACTUR Ladt Pack 45/N
Summary of Contents for PACTUR Ladt Pack 45/N
- Page 2 УПАКОВОЧНОЕ ОБОРУДОВАНИЕ ПРОИЗВОДСТВО И ПОСТАВКА СЕРВИСНЫЙ РЕМОНТ ЗАПАСНЫЕ ЧАСТИ РАСХОДНЫЕ МАТЕРИАЛЫ Диагностика, ремонт, сервисное обслуживание. Запасные части и расходный материал: резина, тефлоновая лента, термонож (лезвие), гель для смазки. Плёнка термоусадочная полиолефиновая. Система «Trade-In» − замена Вашего оборудования на новое и более...
- Page 3 Index C H A P T E R General information pages 1 ÷ 4 C H A P T E R Machine description pages 5 ÷ 7 CHAPTER 3 pages Safety 8 ÷ 10 CHAPTER 4 pages Installation 11 ÷ 14 CHAPTER 5 pages Control board...
- Page 4 1.2 Certification The machine is produced in compliance with the safety regulation in force at the time of its manufacturing. As the machine is not included in the IV Attachment of the 89/392/CEE rule, Pactur srl produces its own self certification.
- Page 5 1.4 Warranty Pactur grants 1 year warranty, except for conveyorbelts, electrical and electronic components and any part which is worn out by normal use. Warranty includes only the components and not the labour. The following situations are out of the warranty conditions: any damage caused during transport, loading, unloading, collocation of the machine any operator’s fault...
- Page 6 1.6.2 Consignee This manual is meant for the operators and for the technicians in charge of the machine maintaining. The owner is not allowed to make any operation, which is up to the operator or to the maintaining technician. The manufacturer is not responsible for any damage due to disregard of this warning. 1.6.3 Instruction manual keeping The instruction manual must be kept in a safe place, where it is easy to get it for, at least, ten years and/or as long as the machine is in use.
- Page 7 1.6.4 Used symbols GENERAL DANGER It warns about any risk, even deadly risk, for the operator ELECTRIC SHOCK DANGER It warns about the danger to get an electrical shock, if the operation is not carried out according to the instructions WARNING It points out a major function or some important information.
-
Page 8: Machine Description
Chapter MACHINE DESCRIPTION 2.1 Main functioning The machine, model 45/N, is made of: an impulse sealing system, suitable for sealing centre folded film in roll and made of a nichel- chrome blade, which cuts and seals the film, thanks only to the manual pressure on the sealing a motorised conveyor belt, which takes the wrapped product into the shrink tunnel and, after a set time, it takes the product either back to the operator or out from the opposite side a shrink tunnel, heated by armoured heaters. - Page 9 2.3 Environmental conditions The machine 45/N does not require any special environment, provided that it is placed in a factory or warehouse, with light, air and levelled floor. Acceptable temperature: from 5°C to 40°C: with humidity within 50% , up to 40°C with humidity more than 50%,up to 20°C 2.4 Lighting The lighting of the working place must be in compliance with the rules in force in...
- Page 10 2.8 Technical data Hereby the main technical data are recorded. Total machine length: (mm)…………………………………….1.150 Total machine width (mm)……………………………………...1.080 Working table height (mm)……………………………………….880 Machine weight ( Kg.)…………………………………………..…150 Max film roll length (mm)………………………………………...450 Max film roll diameter (mm)…………………………………..…250 Max product height (mm)……………………………………..…150 Sealing dimensions (mm)…………………………..……340 x 450 Power consumption …………(See metal label on the machine ) Power supply ………………….( See metal label on the machine)
- Page 11 Chapter 3. SAFETY 3.1 General warning Whenever industrial machinery is in operation, it has to be taken into consideration, that any moving mechanical part, all electrical parts under power supply, any heated part, etc. might be the cause of serious injuries for people or damages for material things. Therefore, he who is responsible for the machine safety in the company, has to check carefully that: no incorrect operation is carried out...
- Page 12 3.2 Correct use The machine 45/N was conceived for packing products in shrink film. The machine must be manually operated. 3.3 Forbidden use The machine cannot be used: for any use different from the description of paragraph 3.2 in explosive, aggressive atmosphere, when there is a high concentration of powder or of oil substances in risk of fire under climatic inclemency...
- Page 13 3.5 Protection devices The machine is provided with suitable devices, meant to protect the operators from the heating parts. 3.6 Stop functions The machine is completely stopped by turning off the main switch, which cuts off the power supply to all the machine elements.
-
Page 14: Installation
Chapter 4. INSTALLATION The under mentioned operations must be carried out only by specialised workers, who are authorised to use fork lifters and to assemble and disassemble packed machinery. Unpacking must be executed in compliance with the rules in force. 4.1 Packing When the machine is shipped, it can be: only protected by “bubble”... - Page 15 4.2 Transport and moving In order to move the packed machine, a fork lifter, suitable to the machinery weight, has to be used. Pls be sure that no unauthorised people are in the working area, while the packaging is being lifted and moved. 4.2.1 Moving with fork lifter The forks of the lifter must be set in the centre and opened as much as possible, according to the packaging width.
- Page 16 4.3 Storage In case of a long time of inactivity, the machine must be stored cautiously: the storage must be in a closed room all non painted parts must be covered with grease the machine must be protected against pushes and vibrations the machine must be protected against humidity and high temperature shifting the machine must be protected against any corrosive substance.
- Page 17 4.5 Machine setting. The machine setting is up to the customer and the operations depend on the kind of packaging (see paragraph 4.1). First of all, it is essential to verify the room fits the machine setting No hindrance should prevent the operator from reaching all access areas of the machine, as well as to get away immediately, in case of danger.
- Page 18 Chapter Electronic control board The model 45/N is equipped with a potentiometer control board, which allows to control quickly and correctly all the machine functions. Picture no. 7 5-2 Tunnel temperature adjustment The tunnel temperature is adjusted by a simple linear potentiometer. The temperature must be adjusted, according to the kind of used film, in order to get a good shrinkage result.
- Page 19 The time of the sealing impulse is indicated by the scale, drawn on the potentiometer. These values are in seconds. When the red light at the bottom on the right is on, it represents the lasting of the impulse. As there are plenty of different films in the market, it is not possible to provide detailed specifications for every kind of film.
- Page 20 5-5 Packing cycle The position of the last potentiometer on the right (see picture no. 12) allows to select the packaging cycle: position no. 1: the conveyor belt does not move, so it does not take the product into the shrink tunnel. The result is only a sealed, but not shrunk bag position no.