Precautions And Safety Instructions - Klimasan S 56 SC Operating Manual

3. PRECAUTIONS AND SAFETY INSTRUCTIONS BEFORE THE
INITIAL START-UP
Your visi/cooler must be plugged certainly in an earthed wall
socket.
Before operating the visi/cooler, ensure that the mains socket is
checked for proper earthing (grounding) and nominal voltage and
frequency requirements by the authorized service staff or a qualified
electrician. If the supply cord is damaged, it must be replaced by the
manufacturer, or its authorized service or a similarly qualified person in
order to avoid any hazard.
Do not use multi socket and extension cable.
The main power supply to which the visi-cooler is connected
must have a leakage current relay.
The nominal voltage and frequency requirements for the body are
specified on the data plate.
Never make any repairs or carry out maintenance while the
visi/cooler is plugged in the mains socket.
Do not position the visi/cooler in a place, close to a source of strong
heat or exposed to direct sunlight. Always remember that the UV lights
in the sunlight deteriorates food in the glass door visi/coolers. The
appliance can be used in ambient temperature of max. 32 °C.
Unless otherwise stated, do not place your cooler to open areas where
water can leak in.
Do not wash with pressurized water or hose when cleaning the product
and its surroundings, use a wet cloth. Otherwise, the water which may
intrude into the electrical components of the product can cause electric
shock and fire risk.
Start the visi-cooler on a level surface. Position it on the floor and
make sure that it is level using a bubble gauge. If the visi-cooler is
found to tilt in one particular direction, please adjust the height of
the corresponding leg until it is level. Then please move the
visi/cooler to the location where it will be used.
2