Connecting To An Audio System - Toshiba SD-P1880SE Owner's Manual

Connecting to an audio system

Notes
• Refer to the owner's manual of the connected equipment as well.
• When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player away
from the tuner and radio.
• The output sound of the player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening
level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the player's power cord. If you leave the amplifier power on, the
speakers may be damaged.
To AV OUT
Audio/video
cable (supplied)
(red)
To audio inputs
of the amplifier
(white)
(yellow)
When the AV OUT or BITSTREAM/PCM jacks are
connected to the audio input terminals of an audio
system, sounds of discs can be heard on the connected
audio system. For instructions on connections to audio
systems, see .
57
• Make the following setting.
On-screen display
Signal flow
Audio system
Select:
"Bitstream"
"Digital Out" or
"PCM"
Page
46
50
55