Power Connection - Toshiba SD-P1880SE Owner's Manual

Introduction

Power Connection

Connect the supplied AC adapter to power the player.
For mobile use, the battery pack (supplied) is also available.
When using the battery pack, follow the instructions on page
CAUTION
• Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire
or electric shock.
• Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
• Do not use an AC adapter other than one specified, as it can cause a fire or damage to the player.
• When the AC adapter is in use, its temperature may increase. However, it is not a malfunction. Make sure that the
power cord is disconnected and the temperature decreases before carrying it.
Follow steps 1 to 3 to connect.
When disconnecting, reverse this order.
3
To wall outlet
Power cord
Power supply cord selection
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration Plug type
EURO
UK
16
60
1
AC adapter
Connect the supplied AC adapter
and the power cord firmly.
Line voltage
220 – 240V
220 – 240V
.
To the DC IN 12V jack
2