Advertisement
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
Please read and understand these instructions completely before installation
!
to avoid possible injury, or damage to the accessory or vehicle.
TOOLS NEEDED FOR INSTALLATION
- Wire Crimpers
- Wire Strippers
INSTALLATION NOTES
The use of a thread locker is recommended on all screws to prevent loosening due to vibration.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or
workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects
in material or workmanship. Labor for replacement of defective components is not covered.
All SSV Works Speakers are covered by a limited 1 year warranty against defects in material or
workmanship. Contact SSV Works for further warranty information.
SPEAKER SPECIFICATIONS
- Cutout Diameter: 9-3/16" (23.4cm)
- Mounting Depth: 4-5/8" (11.8cm)
- Power Handling: 300 RMS/600 Peak (W)
- Impedance: 4 ohm
- Drill with 1/8" Drill bit
- #2 Phillips Screwdriver
SSV-10M
Weatherproof
10" Subwoofer
- Scribe or Marker
Advertisement
Table of Contents
Related Manuals for SSV Works SSV-10M
Summary of Contents for SSV Works SSV-10M
- Page 1 All SSV Works Electronics are covered by a limited 1 year warranty against defects in material or workmanship. Labor for replacement of defective components is not covered. All SSV Works Speakers are covered by a limited 1 year warranty against defects in material or workmanship. Contact SSV Works for further warranty information.
- Page 2 For proper sound, ensure the speaker polarity is correct connect the “+” to the “+” and the “-“ to the “-“from the speaker wire to the amplifier. If using with an SSV Works complete system refer to the amplifier wiring instructions for more detailed wiring information.
Need help?
Do you have a question about the SSV-10M and is the answer not in the manual?
Questions and answers