Toshiba e750 User Manual page 205

Error messages during FTP service
The FTP server could not be started because the FTP client is
operating.
Cause
Solution
The FTP client could not be started because the FTP server is oper-
ating.
Cause
Solution
Unable to delete (file/folder name)
Cause
Solution
Unable to delete read-only file.
Cause
The selected file/folder already exists. Enter another file/folder
name.
Cause
Solution
Enter a file/folder name.
Cause
Solution
The following characters cannot be used in the file/folder name. \ / ; ,
: * ? " < > |
Cause
Solution
Cannot rename file/folder.
Cause
Solution
User's Manual
A request to start the Bluetooth FTP server was received from
a peripheral device while the Bluetooth FTP client is operating
on Local Device.
If you exit Bluetooth FTP on Local Device, the request from the
peripheral device to start the Bluetooth FTP server can be
accepted.
You tapped the Bluetooth FTP icon to try to start Bluetooth
FTP while the Bluetooth FTP server is operating.
Exit Bluetooth FTP on Local Device. Once the Bluetooth FTP
server is closed, start up Bluetooth FTP.
An error occurred while trying to delete a file or folder, or a
separate file or folder exists within the specified folder.
Remove the file or folder from the specified folder and try
deleting it again.
Local Device tried to delete a file on the remote device, but
because it is a read-only file, it could not be deleted.
The name you tried to enter already exists.
Enter a different name.
Either nothing has been entered for the name or the name con-
sists of spaces or begins with a period.
Enter a correct name.
You entered an invalid character in the file/folder name.
Rename the file/folder using correct characters.
A processing error occurred because the entered name
exceeded the maximum length.
Enter a shorter name.
Error Messages for Bluetooth
C-6