Using Voice Command - Toshiba e400 User Manual

■
Check at least one of the following: Read the name of the sender,
Read the subject, Read the date of receipt, or Read the message.
■
After reading wait for: Sets the time interval for reading the following
mail. To read the message while this setting is available, tap the mes-
sage area within the interval time. This message is only available
when the Read the message check box is cleared.
■
Default Value: Resets all the values to the default.

Using Voice Command

With Voice Command, you can operate your Pocket PC "hands free" with-
out tapping or pressing buttons on your Toshiba Pocket PC e400/e405.
The Voice Command application has three components:
■
Global Command: the command always available
■
User Command: the command that users can assign freely, always
available.
■
Command for each application: Command available only for the
foreground windows.
Installing the Voice Command
1. Make sure your Toshiba Pocket PC e400/e405 is connected to your
computer and that an ActiveSync connection has been established.
2. Start the Voice Command installation by running the Setup program.
3. After the program is installed successfully, a message displays to
inform you that the application has been allocated to the Program
button 5 (recording button) automatically.
4. After installation, the system requires resetting.
The Voice Command cannot "read" without the TOSHIBA
Text to Speech for Pocket PC installed. Installation of the
Toshiba Text to Speech for Pocket PC is highly recom-
mended.
Once Voice Command is installed on your Toshiba Pocket
PC e400/e405, the Program button 5 (recording button at
initial setting) is "assigned" and recording with Program
button 5 is no longer available. If you want to use Program
button 5 for recording while the Voice Command is
assigned, change the button assignment by tapping Start,
Settings, and then Buttons.
Chapter 8: Optional Functions
105