Emotiva ERC-4 User Manual page 13

5. Play / Pause Transport Control Button
When a CD is playing, press this button to temporarily stop playback. When a
CD is paused, press Play / Pause again to resume playback from the current location.
6. Next Transport Control Button
Press the Next button once to move to to the beginning of the next track. Pressing this button
repeatedly will move forward one song each time you press it.
7. Standby (Power) Button
Press the Standby button to toggle the ERC-4 between Standby and On. The halo ring around the
Standby Button will illuminate amber in Standby mode and blue when the ERC-4 is On.
(The rear panel Power switch must be On to operate the ERC-4.)
8. Open (Open / Close) Transport Control Button
Press the Open button once to open the CD Loading Tray when it is closed; press the Open button
once to close the CD Loading Tray when it is open.
9. Input Select Button
Press the Input Select button to cycle between playing an audio CD, and accepting an input from
one of the two S/PDIF digital audio inputs. (OPT will display when the Optical S/PDIF input is
selected; COAX will display when the Coax S/PDIF input is selected.)
Note: The control processor in the ERC-4 remembers the current location on every disc you play.
If you insert a disc which you have previously played, or turn on the ERC-4 with a disc already
inserted, it will resume playing at the location where playback of that disc was stopped the last
time it was played on the ERC-4. To start playing the disc again from the beginning press the
Play Button.
Note: The ERC-4 defaults to the CD Input. Therefore, if you turn on the ERC-4 , it will select the
CD Input as its audio source. If there is already a CD in the drive, it will start playing from the
location where it was previously stopped.
Emotiva ERC-4
Page 9