Advertisement
When the device is mounted externally it can use the A-1028 mounting box.
Mounting springs
for recess mounting
A-3018
In recess mounting installation the
required opening is 280 x 50 mm.
The material must withstand the
luminaires weight.
NOTE:
LED= Light Emitting Diode
LABELING EXPLANATION:
X: Self contained
1: Maintained (*)
A: Including test device
180: 3 hour duration
In case that the led strip must be replaced to ensure lumen output LED module can be
replaced only by a competent personnel.
(*) Maintained operation: The luminaire lights its illumination source, when it is powered by the mains
power supply or not.
Non-Maintained operation: The luminaire lights its illumination source, only in power supply's failure.
Page 3 from 3
Mounting methods
Ceiling mounting
A-3018 mounting springs
Recess mounting
in suspended ceiling
280
50
Wall mounting
Placing the mounting springs
Α-3018
1
Place one part of the mounting spring
1
first and then the other one.
2
Place the edges of the mounting spring
as shown in picture.
2
922044006_09_020
Advertisement
