Neousys IGT-30 Series User Manual page 27

7. To install the internal microSDHC card, with the orientation shown below, gently
press down and slide the holder in the direction shown to unclip the
microSDHC card. Flip open the holder to install/ replace the microSDHC card.
8. Place the replacement microSDHC card in the slot, make sure the notch
matches (indicated by the red circle), flip the holder over to sit on top of the
microSDHC car and slot, push in the direction shown to secure microSDHC
card.
Make sure the notch meets
NOTE
When in doubt which direction to lock and unlock the microSDHC card holder,
please refer to the markings (OPEN/ LOCK) on the holder.
IGT-30 Series
To secure the microSDHC card
27