uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
■
Inflating an Under-inflated Tire
You can use the kit to inflate a non-punctured under-inflated tire.
Sealant/Air
Hose
Valve Cap
Sealant/Air Hose
Tire Valve Stem
636
1. Open the trunk floor lid.
2 Getting Ready to Temporarily Repair
the Flat Tire P. 626
2. Remove the kit from the case.
3. Place the kit, face up, on flat ground near
the flat tire, away from traffic. Do not
place the kit on its side.
4. Remove the sealant/air hose from the kit.
5. Remove the valve cap.
6. Attach the sealant/air hose onto the tire
valve stem. Screw it clockwise until it is
tight.
1Inflating an Under-inflated Tire
NOTICE
Do not operate the temporary tire repair kit
compressor for more than 15 minutes. The
compressor can overheat and become permanently
damaged.