uuIndicatorsu
Indicator
Name
Road Departure
Mitigation
(RDM) Indicator
102
On/Blinking
●
Comes on when the RDM system
shuts itself off.
Indicator may come on
●
temporarily when the Maximum
Load Limit is exceeded.
Explanation
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator and message come back on
after you cleaned the area around the
camera.
2 Front Sensor Camera P. 544
Indicator may come on temporarily when
●
passing through an enclosed space, such
as a tunnel.
The area around the radar sensor is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth. Indicator may take
some time to go off after the radar sensor
is cleaned.
Have your vehicle checked by a dealer if
●
the indicator does not go off even after
you cleaned the radar sensor.
2 Radar Sensor P. 546
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 459
Stays on constantly - Have your vehicle
●
checked by a dealer.
Message
—