Air impact wrench pneumatic impact wrench passport (11 pages)
Summary of Contents for Tarboya TY-51055L
Page 1
TY-51055L Air Impact Wrench TY-51055L Pneumatic Impact Wrench Upon receipt of the TY-51055L Air Impact Wrench, read and follow all safety information and operating instructions before first use. Retain this passport for future reference Tarboya Pneumatic Tools Co., Ltd www.tarboyatools.com...
TY-51055L Air Impact Wrench Content This passport is a single document, combined with a technical description and operating instructions, and consists of the following sections: 1.General Information………….……………………….……….……………………………………………….……3 Graphical Symbols……………………………………….………………………………………….3 2.Description……………………….…….…..……………………………………………………………….…….…3 Overview……………………………………………………………………..……………………….3 3.Warranties……….……………….………………………………………………………………………….……….3 4.Safety Considerations.…………………………………………..…………………………………………….……3 Personal Injury Protection……………………………………………………………..……………4 Installation, precautions…………………………………………………………………………..…4 Operation, precautions………………………………………………………………………………4 5.Technical Specifications….…..….…..……..…………………………………………………………….………..
3. Warranties Tarboya warrants TY-51055L will not have any material or manufacturing defects for the period of 12 months from the date of delivery. The warranty for flawless function of the goods and the materials used is granted for the period of 12 months from the date of delivery of the goods.
Put the machine into service only if the supply pressure hose is not damaged. • Check the pressure hose and air connections regularly. If damaged, have them replaced in the service authorized to carry out such repairs. Contact Tarboya Personal Injury Protection •...
TY-51055L Air Impact Wrench An impact wrench left unattended, or with the air hose attached, can be activated by unauthorized persons leading to their injury or injury to others. • Remove air hose when tool is not in use and store tool in secure location away from reach of children and untrained users.
TY-51055L Air Impact Wrench MODEL TY-51055L DRIVE 1” ANVIL LENGTH 8” SPEED 3,800 RPM BOLT CAPACITY 48MM APPLIED TORSION 1,300-2,600NM MAX TORQUE 2,980NM HAMMER MECHANISM ROCKING DOG CLUTCH AIR CONSUMPTION 25CFM AIR PRESSURE 0.63MPa AIR INLET 1/2” AIR HOSE 1/2”...
TY-51055L Air Impact Wrench 7.Installation Prior to use The impact wrench requires the attachment of a quick-connector into its air inlet. To do so, wrap approximately 3" of pipe thread sealer tape (not included) around the male threads of a quick-connector.
• After each service, check that the machine's vibration level is normal. If not, contact your nearest authorized workshop. For more information, contact Tarboya. Every day Before undertaking any maintenance or changing a piston on the Air Impact Wrench, always switch off the air supply, bleed the machine by depressing the start and stop device, and disconnect the air hose from the machine.
A copy of this passport is supplied with each machine TY-51055L.All rights reserved. No part of this publication may be reproduced without prior consent granted by Tarboya Manufacturer’s Address...
TY-51055L Air Impact Wrench 10. Troubleshooting Problem Possible Cause Solution There is grit or gum in the Flush the tool with air tool oil or gum solvent tool. The tool is out of oil. Lubricate the tool • Adjust the regulator on the tool to the maximum setting
The air pressure is low.