PROFSAFE DG Series Manual page 9

5. 5.
Inside of the cover plate inside the door you find the locking mechanism and the lock.
Note that access inside the cover plate is only allowed for authorized person.
Access by non-authorized person may result in both certificate and warranty is no longer being valid.
6. 6.
Annual maintenance should be carried out on the eurograde safe to ensure trouble-free usage:
Checking function of the lock
Checking function and smooth movement of the locking bolt.
If necessary greasing of the hinges
If necessary greasing of the moving parts in the locking mechanism but not the lock itself.
Checking the steel wire for the re-locker.
NOTE: Never grease any lock!
Allow only authorized person to work with the lock and the locking mechanism.
7.
The safe has 12 months warranty from date of delivery.
8.
Please note! When frequent daily openings of the safe the code shall be exchanged at least once a
year to minimize wear of the keypad.
The ! symbols in examples show the number of beeps you hear.
Always wait for each set of beeps to end before entering another number or letter, or you will interrupt
the code sequence.
Changing Your Own Code or the Factory Default Code
2 2 * YOUR OLD CODE # ( ! ! ! ! ! ) NEW CODE # ( ! ! ! ) NEW CODE # ( ! ! ! )
Creating a New Code (Supervisor or User Code)
7 4 * MASTER CODE OR SUPERVISOR CODE # ( ! ! ! ! ! ) PIN POSITION # ( ! ! ! )
NEW CODE # ( ! ! ! ) NEW CODE # ( ! ! ! )
Deleting a Code (Supervisor or User Code)
7 4 * MASTER CODE OR SUPERVISOR CODE # ( ! ! ! ! ! ) PIN POSITION # ( ! ! ! ) # ( ! ! ! ) # ( !
! ! )
Cover inside of the door
Maintenance and control
Warranty
Quck guide digital lock D-DRIVE
Int phn.+46 371-52 32 90 www.profsafe.se
Sida/Page 9 av/of 10