PROFSAFE DG Series Manual page 10

Change battery
Pull the keypad tab out slightly and turn the keypad ring counterclockwise.
The ring will pull out from the base far enough to reveal the battery compartment.
Remove the battery from the connector.
Attach the new battery and place it in the battery compartment.
Push the keypad ring back against the base and turn it clockwise until it clicks into place.
Test the lock function at least three times with the door open before closing the safe.
Int phn.+46 371-52 32 90 www.profsafe.se
Sida/Page 10 av/of 10