Creating Optical Recovery Discs - Toshiba Satellite P750 Series User Manual

Toshiba laptop user manual
Hide thumbs Also See for Satellite P750 Series:
Table of Contents

Advertisement

Creating Optical Recovery Discs

This section describes how to create Recovery Discs.
Be sure to connect the AC adaptor when you create Recovery Discs.
Be sure to close all other software programs except the Recovery
Media Creator.
Do not run software such as screen savers which can put a heavy load
on the CPU.
Operate the computer at full power.
Do not use power-saving features.
Do not write to the disc when the anti-virus software is running. Wait for
it to finish, then disable virus detection programs including any software
that checks files automatically in the background.
Do not use utilities, including those intended to enhance hard disk drive
access speed. They may cause unstable operation and damage data.
Do not shut down/log off or Sleep/Hibernate while writing or rewriting
the disc.
Set the computer on a level surface and avoid places subjected to
vibrations such as airplanes, trains, or cars.
Do not use on unstable tables or other any other unstable surfaces.
A recovery image of the software on your computer is stored on the hard
disk drive, and can be copied to DVD media by using the following steps:
1. Select either blank DVD media.
2. The application will allow you to choose from a variety of different media
onto which the recovery image can be copied including DVD-R, DVD-R
DL, DVD-RW, DVD+R, DVD+R DL and DVD+RW.
Please note that some of the above media may not be compatible with the
optical disc drive installed into your computer. You should therefore verify
the optical disc drive supports the blank media you have chosen before
proceeding.
3. Turn on your computer and allow it to load the Windows 7 operating
system from the hard disk drive as normal.
4. Insert the first blank media into the optical disc drive tray.
5. Select the application from Start Menu.
6. After Recovery Media Creator starts, select the type of media and the
title you wish to copy, and then click the Create button.
If your optical disc drive can only write to CDs, select "CD" as the "Disc Set"
within the Recovery Media Creator application.Otherwise, if your optical
disc drive can write both CDs and DVDs, select the type of media you want
to create.
User's Manual
Satellite P750/P755 Series
1-14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite p755 series

Table of Contents