Advertisement
Quick Links
Unpack the following components to get started.
Bedside Controller
1
Set Up
Place the bedside controller on a hard, flat
surface at the height of your pillow and near
a wall outlet.
Please read these instructions and the Product
Manual completely. Take some time to set up Ebb
in your bedroom prior to first use.
For support you can contact Ebb Customer Care
at (800) 381-1145.
Headband
2
1. Insert headband connector to
back of bedside controller until
you feel it click.
Fluid Cartridge
Connect Headband
Quick Start Guide
Power Supply
2. Tug firmly on the headband
connector to make sure
it is inserted correctly.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ebb ebb
Summary of Contents for Ebb ebb
- Page 1 Quick Start Guide Please read these instructions and the Product Manual completely. Take some time to set up Ebb in your bedroom prior to first use. For support you can contact Ebb Customer Care at (800) 381-1145. Unpack the following components to get started.
- Page 2 Insert Fluid Cartridge 1. Remove orange cap from fluid 2. Open Lid. 3. Insert fluid cartridge 4. Hold down and turn to lock position. 5. Knob is in locked position. Wait 30 seconds cartridge before inserting. and hold down. before using bedside controller. Connect the Power Supply Note: The connection is intentionally snug.
- Page 3 Tube Placement Ebb Therapeutics recommends running the tubing between your mattress and headboard (or wall) to help hold the tubing when moving around during sleep. WARNING For a complete...
Need help?
Do you have a question about the ebb and is the answer not in the manual?
Questions and answers