Table of Contents
Advertisement
Next Steps
You can customize the FN I/O Module for use in your data center network. To perform additional switch
configuration, do one of the following:
•
For remote OOB management, enter the OOB management interface IP address into a Telnet or
secure shell (SSH) client and log in to the switch using the user ID and password to access the CLI.
The default user ID is root and the default password is calvin.
•
For local management using the CLI, use the attached console connection.
•
For remote in-band management from a network management station, enter the IP address of the
default virtual local area network (VLAN) and log in to the switch to access the CLI.
•
In a Dell Networking OS upgrade, ensure that the FN I/O Module is running the latest Dell Networking
OS version by entering the show version command.
For information about how to configure the software features, see the Dell PowerEdge FN I/O Module
Configuration Guide, which is available on the Dell Support website at
manuals.
For information about how to configure the Dell PowerEdge FN I/O Module using Graphical User
Interface (GUI), see the Dell Blade I/O Manager Online Help.
12
http://www.dell.com/support/
6
Next Steps
Advertisement
Table of Contents
