Maintenance; Safety Precautions; Engine Oil Change - Lincoln Electric Ranger 200 Operator's Manual

Table of Contents

Advertisement

D-1

SAFETY PRECAUTIONS

WARNING
• Have qualified personnel do all maintenance
and troubleshooting work.
• Turn the engine off before working inside the
machine or servicing the engine.
• Remove guards only when necessary to
perform maintenance and replace them when
the maintenance requiring their removal is
complete. If guards are missing from the
machine, obtain replacements from a Lincoln
Distributor. (See Operating Manual Parts List.)
Read the Safety Precautions in the front of this
manual and in the Engine Owner's Manual before
working on this machine.
Keep all equipment safety guards, covers, and
devices in position and in good repair. Keep hands,
hair, clothing, and tools away from the gears, fans,
and all other moving parts when starting, operating, or
repairing the equipment.
Routine Maintenance
At the end of each day's use, refill the fuel tank to
minimize moisture condensation in the tank. Running
out of fuel tends to draw dirt into the fuel system.
Also, check the crankcase oil level and add oil if
indicated.
KOHLER ENGINE MAINTENANCE
COMPONENTS
TABLE D.2
ITEM
MAKE AND PART NUMBER
Oil Filter
Kohler 5205002
Air Filter Element
Kohler 4708301, Fram CA6605
Air Filter Pre-Cleaner
Kohler 5208301
Fuel Filter
Kohler 2505002, Fram G1
Spark Plug
Champion RC12YC (.040" Gap)
Battery
BCI Group 58 (435)

MAINTENANCE

KOHLER ENGINE MAINTENANCE
SCHEDULE
FREQUENCY
Daily or Before
Starting Engine
Every 25 Hours
Every 100 Hours
Every 100 Hours
Every 100 Hours
Every 100 Hours
Every 200 Hours
Every 200 Hours
Every 2 Years
(1) Service more frequently when used in dusty areas and/or at high ambient
temperatures.
Rerfer to your Operators Manual for periodic
maintenance.

Engine Oil Change

Drain the oil while the engine is warm to assure rapid
and complete draining.
1.Remove the oil filler cap and dipstick. Remove the
yellow cap from the oil drain valve and attach the
flexible drain tube supplied with the machine. Push
in and twist the drain valve counterclockwise. Pull
the valve out and drain the oil into a suitable con-
tainer.
2. Close the drain valve by pushing in and twisting
clockwise. Replace the yellow cap.
3. Refill to the upper limit mark on the dipstick with the
recommended oil. Tighten the oil filler cap securely.
RANGER 200
TABLE D.1
MAINTENANCE REQUIRED
• Fill fuel tank.
• Check oil level.
• Check air cleaner for dirty, loose,
or damaged parts.
• Check air intake and cooling
areas, clean as necessary.
• Service air pre-cleaner..
• Change engine oil.
(1)
• Replace fuel filter element.
• Clean or replace air filter ele-
ment.
(1)
• Spark Plug Arrester (Optional)
• Replace oil filter.
(1)
• Check spark plug and gap
• Check fuel lines and clamps.
D-1

Advertisement

Table of Contents
loading

Table of Contents