Subscribe to Our Youtube Channel
Related Manuals for ARGtek Power King-Plus ARG-1320
Summary of Contents for ARGtek Power King-Plus ARG-1320
- Page 1 ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742 sales@argtek.com...
-
Page 2: Package Content
WAN port is sending or receiving data. Wired LAN port(s) is connected and active. Wired LAN port(s) is disconnected or inactive. Flashing Wired LAN port(s) is sending or receiving data. ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742... -
Page 3: Rear Panel
Connect your 3G USB modem. USB Port Reset Button Reset router to manufacture default configurations or start WPS function. Antenna RP-SMA connector for connecting antenna. Connector Network Setup ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742 sales@argtek.com... - Page 4 10.10.10.X. It will take about 55 seconds to complete the boot up sequence after power on. You can refer to user manual for the details of how to configure your network. ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742 sales@argtek.com...
- Page 5 10.10.10.XXX and try to connect again. Otherwise, please press Reset button around 10 seconds to restore AP and try to enter again Select the Operation Mode on the left side of setup frame 1. In Operation Mode, select Gateway and press Apply ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742 sales@argtek.com...
- Page 6 2b. In Internet Setting/LAN/, you may change the setting of IP address, DHCP and etc. then press Apply 3. In Wireless Settings / Basic, you may change the setting of SSID, and then press Apply ARGtek Communication Inc. www.argtek.com E-Mail:...
- Page 7 Apply Finish setting and press Apply, the setting will be completed after rebooting around 20 seconds. Note: You have to connect ADSL cable with WAN port of this equipment. ============================================================== ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742...
- Page 8 AP and try to enter again Select the Operation Mode on the left side of setup frame 1. In Operation Mode, please select Bridge. Select AP or Main AP in Wireless Operation Mode and press Apply ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742 sales@argtek.com...
- Page 9 4. In Wireless Settings / Security, you may change the setting of password, and then press Apply Finish setting and press Apply, the setting will be completed after rebooting around 20 seconds. Note: You have to connect cable line with LAN port of this equipmen ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742...
- Page 10 10.10.10.XXX and try to connect again. Otherwise, please press Reset button around 10 seconds to restore AP and try to enter again Select the Operation Mode on the left side of setup frame 1. In Operation Mode, please select Gateway. And then press Apply ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742 sales@argtek.com...
- Page 11 2b. In Internet Setting/LAN/, you may change the setting of IP address, DHCP and etc. then press Apply 3. In Wireless Settings / Basic, you may change the setting of SSID, and then press Apply ARGtek Communication Inc. www.argtek.com E-Mail:...
- Page 12 Apply Finish setting and press Apply, the setting will be completed after rebooting around 20 seconds. Note: You have to connect cable line with LAN port of this equipment. ============================================================= ARGtek Communication Inc. www.argtek.com E-Mail: Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742...
Need help?
Do you have a question about the Power King-Plus ARG-1320 and is the answer not in the manual?
Questions and answers