Advertisement
③ IR OUT: Connect with IR Emitter.
④ HDMI OUT: Connect to display.
⑤ EQ SETTING: After the system is connected, press this button three
to six times repeatedly for the best output image. When the cable,
source or display is changed, or the output resolution is reset, you
need to press this button again repeatedly to ensure the best image.
Specifications
Input
Input Connector
Output
Output Connector
Control
Control
Connector
General
Transmission
Distance
HDMI Standard
EDID
Management
HDMI Extender over Cat5e/6
Transmitter
(1) HDMI
(1) 19-pin type-A female
HDMI
(1) HDMI; (1) CAT
(1) 19-pin type-A female
HDMI; (1) RJ45
(1) IR IN; (1) IR OUT
(2) 3.5mm mini jacks
1080p@60Hz≤55m
HDMI 1.3, HDCP 1.4 compliant
Built-in EDID
5
Receiver
(1) CAT
(1) RJ45
(1) HDMI
(1) 19-pin type-A
female HDMI
(1) IR IN; (1) IR
OUT
(2) 3.5mm mini
jacks
Advertisement
