XtraLight CITYSAVER Important Safety Instructions Manual page 6

CITYSAVER™ LED
ROADWAY LUMINAIRE
5. Close the door by tightening the two door screws until firmly seated.
6. A photocontrol or shorting cap is required for luminaire operation. Install either a PC or SC into the
NEMA receptacle in the top of the luminaire following manufacturer's recommendations. (See Figure 6)
If photocontrol receptacle rotation is required for North orientation, loosen the two slotted head screws.
Rotate receptacle 90⁰, 180⁰, or 270⁰ to face North, then re-tighten screws until snug, using 20-25 in.-lbs.
of torque.
Figure 6