Nubert nuConnect ampX Quick Start Manual

nuConnect ampX
Integrated Amplifier and Wireless Connector
QUICK START
GUIDE
You can find the most recent version of the
operating manual here: www.nubert.de/downloads/61/
1

Mounting the antennas

Place the nuConnect ampX on a flat, stable surface. Make sure
!
that there is some free space around the amplifier to ensure proper
cooling.
To mount the antennas, Place the antennas over the antenna termi-
nals on the rear panel and turn the antennas clockwise until they are
firmly attached. Point the antennas upwards.
2 2

Cable connections

Kabelverbindungen
Make sure all cable connections between amplifier, sources, loudspeakers and (optional) subwoofer are made
before switching the amplifier on!
Sources, subwoofer
nuConnect ampX · Quick Start Guide · 12/2019
At the digital Port input,
you can plug in the
supplied HDMI/ARC
adapter, enabling
the direct connection
of a TV.
Be sure to enable the
CEC and ARC functions
on the TV and set
the audio output format
to PCM.
Passive
loudspeakers
1
The nuConnect ampX is
connected to the power grid using
the supplied power-cable.
Move the power switch on the back
to the ON position to switch on the
amplifier! If necessary, press the
power-button on the remote control
to "wake up" the amplifier.
®