Basic Installation & Setup - Corega WLBAR-AA Quick Install Manual

3. Basic Installation & Setup
This chapter describes the procedures necessary to configure the basic functions of the router to allow internet access.
The following information should be supplied by your ISP.
Username: & Password:
Now open up Internet Explorer and type:
http://192.168.0.1
For most users, a compatible IP address will be automatically allocated to each computer by the router's internal DHCP server. If you cannot access the
Note!
router – check that the computer has been set to receive a dynamic IP address or manually configure a compatible IP address.
From Windows:
Start/Settings/Network & Dial Up Connections/Local Area Connection/Properties/TCP/IP
The following screen should appear:
Enter the following default username and password.
Username: admin
Password: password
3
Figure 4. Login Screen