Troubleshooting - HoMedics TOTALCLEAN AP-15 Instruction Manual And Warranty Information

This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by the US EPA.
US EPA does not endorse any manufacturer claims of healthier indoor air from the use of this product.
The energy efficiency of this ENERGY STAR qualified model is measured based on a ratio between the
model's CADR for Dust and the electrical energy it consumes, or CADR/Watt.

TROUBLESHOOTING

PROBLEM
Unit will not operate
Reduced airflow or poor
filtering
Excessive noise
Replace filter light remains lit
after filter replacement
The air purifier seems to be
producing odors
POSSIBLE CAUSE
• Unit is not plugged in
• No power to unit
• The back grille may be blocked
• True HEPA Filter may be
clogged
• Carbon Odor Filter may be
clogged
• The unit is not level
• The appropriate replace filter
indicator needs to be reset
• The filters need replacing
9
SOLUTION
• Plug unit in
• Press the ON/OFF button to
turn the power on
• Check circuits, fuses, try a
different outlet
• Check to make sure nothing
is blocking the back grille and
air outlet
• Replace the filter
• Place the unit on a flat, level
surface
• Press and hold the appropriate
replace filter button for 3
seconds
• Replace the filters as needed