Advertisement
One Step
Formula Mixer Parts
™
Battery Cover
Power Button
AA Batteries
(not included)
Lid
Mixing Wand
Pitcher
Cleaning
• Before each use, wash Pitcher, Mixing Wand and bottom of Lid in warm,
soapy water.
Do not immerse the Lid in water.
Mixing Wand and Pitcher are top-rack dishwasher-safe.
• CAUTION: The lid contains electronics, please take note of the following:
- Do not immerse the Lid in water or other liquid.
- Do not place the Lid in a dishwasher.
- Note: If the lid is accidentally immersed and water gets inside, remove battery
cover & batteries, wipe with a dry cloth & allow to dry completely
before next use.
1
Installing Batteries
Turn Battery Cover
Lift Battery Cover.
1
2
counter-clockwise
to open.
Removing & Installing the Mixing Wand
The Wand can be removed for cleaning.
To install the wand,
slide the hole in the end
over the axle on the bottom
of Lid and push firmly until it stops.
Please note: Rechargeable batteries will need more
frequent charging if the mixer is stored in the fridge.
Insert batteries
3
Close Battery Cover by aligning the
4
Open/Close indicator tabs (see below)
then rotating the Cover clockwise.
(Note location of power button)
Open
Closed
To remove the wand, grasp
the bottom of the wand and
pull slowly and firmly.
2
Advertisement
