Table of Contents
Advertisement
11
RS-232
5.2 Receiver Panel
1
3
Name
No.
Power LED
1
SERVICE port Firmware update port.
2
DC 24V
3
HDBT OUT
4
Connection
Signal
5
Indicator lamp
Data Signal
6
Indicator
HDMI OUT
7
AUDIO OUT
8
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to
receiver or from receiver to transmitter.
HDMI OUT
5
4
6
7
Red LED indicates that the receiver is powered on.
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the
other one doesn't need power supply.
RJ45 connector for connecting the HDBT OUT port of
transmitter with a CAT 5e/6 cable.
▪ Illuminating: Transmitter and Receiver are in good
connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI output for display.
3.5mm stereo connector for analog audio output.
AUDIO OUT
8
Function Description
5 / 8
SERVICE
2
IR IN
IR OUT
9
10
11
Advertisement
Table of Contents
