Table of Contents
Advertisement
5. Operation Controls and Functions
5.1 Transmitter Panel
1
3
No.
Name
Power LED
1
SERVICE port Firmware update port.
2
3
DC 24V
4
HDBT OUT
Connection
5
Signal
Indicator lamp
Data Signal
6
Indicator lamp
HDMI OUT
7
HDMI IN
8
IR IN
9
IR OUT
10
HDMI OUT
5
4
6
7
Red LED indicates that the transmitter is powered on.
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the
other one doesn't need power supply.
RJ45 connector for connecting the HDBT IN port of receiver
with a CAT 5e/6 cable.
▪ Illuminating: Transmitter and Receiver are in good
connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI loop output for display.
HDMI source input.
IR input port for receiving the signal of IR remote.
IR output port for control of source device. This IR output signal
is from the IR IN port of receiver.
HDMI IN
8
Function Description
4 / 8
SERVICE
2
IR IN
IR OUT
9
10
11
Advertisement
Table of Contents
