Table of Contents
Advertisement
Profiles
You can configure Voice/Vibration ringtune, key tone, flip tone, sound effects, switch
on, switch off, and volume. The ringtune type supports MP3, .3gp, AAC, MIDI, WAV
and AMR.
Supported profiles are Normal, Silent, Vibrate only, Headset, Outdoor, Customised 1,
Customised 2 and Customised 3 profile. Select a desired profile, and press the
to activate the profile. The Normal, Silent, Vibrate only, Headset and Outdoor profiles
do not provide an option menu. When the cursor is moved to a profile, the
corresponding menu appears on the soft bar. If you select View/Edit menu, you can
view the settings of the profile, or can edit settings of the profile.
Profiles menus have the submenus as shown below.
]
Alert by
This option determines the incoming call notification mode. You can select from
Ring, Vibration, Ring & Vibration, Ring after vibration and Silent.
]
Voice ringtune
This option determines the Voice ringtune for incoming call notification.
]
Video ringtune
This option determines the Video ringtune for incoming call notification.
]
Volume
This option determines the ringtune volume for incoming call notification.
]
Message alert
This option determines the message alert that sounds when a message has arrived.
You can select one of None, Once, Every 1 minute, Every 2 minutes, Every 5
minutes, and Every 10 minutes mode.
]
Message tone
This option determines the message tone that sounds when a new message has
arrived.
]
Confirmation tone
This option determines if warning alerts are on or off.
70
key
Advertisement
Table of Contents
