Advertisement
KTP-24C/KTP-24CE4 Outdoor Power Supply
C
I
OMPLETING THE
See Figure 2 and Figure 3 and perform the following.
Removable terminal strip
Input connections
Hot wire
Neutral wire
24 VAC out
Figure 2. Cable connections
1)
Make cable connections to the removable terminal strip.
CAUTION:
When you replace the cover, properly align the keyed tabs and slots on the cover and housing to prevent the cover from
leaking. See Figure 3.
2)
Replace the cover by aligning the keyed tabs and slots.
3)
Tighten the screws securely to ensure a watertight seal.
2
NSTALLATION
Ground
© 2003 Kalatel, a GE Interlogix company
Figure 3. Cover and housing tabs (
Installation Instructions
) and slots (
)
1035033D / October 2003
Advertisement
