Jenx Multiseat Instructions For Use Manual page 66

Maintenance & Inspection
Maintenance
& Inspection
Stores should follow the MHRA guidelines for the recording, issuing, servicing or repairing of products
in their charge. Check the MHRA web site for the latest bulletins:
www.mhra.gov.uk
• Structure is the product structurally sound, no wobbles or loose parts?
• Safety
is the product safe and fit for use?
• Straps
are the straps in good condition and not showing any signs or wear? Check straps for
fraying and missing or broken buckles, ensure all webbing end clips are in place.
• Stability
is the product stable on an even surface, no rocking?
Screws, Nuts and Bolts
•
• Castors are the castors in good order? Do swivels and brakes work?
• Springs do all gas springs work and hold pressure and weight?
• Sandals
are the sandals in good condition? Do straps and Velcro show signs of wear?
• Upholstery and PU
gaping of the cushions?
• Steel and Woodwork
or breaks
If there is any doubt about the safety of the product, do not hesitate to contact our Customer Support
Department for advice
Products should be thoroughly decontaminated in line with MHRA and local guidelines prior to
inspection, storage and re-issue
Jenx Limited can take no responsibility for re-issue of products
66
Are there nuts and bolts missing or damaged?
is the upholstery and PU in good, clean condition with no rips, wear or
is the steel and wood work in good order? Check for deformities, splinters