Specification & Warranty - Jenx Multiseat Instructions For Use Manual

Specification & Warranty
Maximum user weight
Base Dimensions (Z-Base)
Angle range
Chair height from floor (Z-Base)
Description
Seat Depth (front of seat to
front of lumbar pad)
Hip width
Seat pad width (in the centre)
Back height (top of seat to top
of back pad)
Lower leg length (top of
footplate to top of seat)
Warranty
The Instruction for Use of this product should be followed carefully. It is impossible to eliminate all risks inherently
associated with the use of this product. Product failure or other unintended consequences may result because
of such factors as improper storage, use or maintenance, unauthorised and inappropriate alteration or repair or
improper or violent treatment, excessive strain, use of improper replacement parts, or because of normal wear and
tear, all of which are beyond the control of the Manufacturer and Seller. Buyer and User assume all such risks.
Manufacturer and Seller warrant that this product will be free from defects in material and workmanship for a period
of 24 months from the date of purchase and is reasonably fit for the purposes stated in the Instruction for Use,
subject to the inherent risks under normal use conditions. This Warranty does not extend to the use of the product
contrary to the Instruction for Use, or under abnormal conditions, or under conditions not reasonably foreseeable
to or beyond the control of the Manufacturer or Seller. Buyer and User assume the risk of any such use.
MANUFACTURER MAKES NO WARRANTIES OF SATISFACTORY QUALITY OR OF FITNESS FOR A PARTICULAR
PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT AS STATED ABOVE.
In no event shall Manufacturer or Seller be liable for any incidental, consequential or special damages resulting from
the use of this product. THE EXCLUSIVE REMEDY OF THE USER OR BUYER AND THE EXCLUSIVE LIABILITY OF
MANUFACTURER AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING
CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT STRICT LIABILITY OR
OTHERWISE) RESULTING FROM THE USE OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE
PRICE OF THE PRODUCT OR THE REPLACEMENT OF THE PRODUCT.
Manufacturer and Seller offer this product, and Buyer and User accept it, subject to the foregoing conditions of sale
and limitations of warranty and liability, which may not be modified except by written agreement signed by a duly
authorised representative of the Manufacturer.
Specification
100 Kg
830 x 640 mm
10 ° prone - 25 ° supine
Min: 440 mm Max: 640 mm
Size 4
Min: 285 mm
Max: 450 mm
Min: 200 mm
Max: 440 mm
395 mm
Min: 465 mm
Max: 590 mm
Min: 250 mm
Max: 470 mm
Multiseat
Size 5
Min: 355 mm
Max: 520 mm
Min: 200 mm
Max: 440 mm
435 mm
Min: 525 mm
Max: 660 mm
Min: 250 mm
Max: 470 mm
jenx.com
13